Saturday 17 August 2013

How to pass Material Science in AMIE

It is true that Material Science and Engineering is the toughest subject in AMIE Section A.
Everyone thinks How to pass Material Science in AMIE? Because it is tough so you need to give extra focus on this subject. And it will help you lot if you get some guidance. I can help you some what I know which I earn from my experience. The main tips to pass material science in Amie are, you have to study hard but in style. Now what is the style I mansion here? Style means you have to make a plan to select easy and number carrying module. Do your homework first like before start preparation
  •   Make separate note book for Material science.
  •   Paste syllabus on first page.


Now you see which module is easy. Here I give those modules according to me which I feel easy and understandable easily. First I go with Group A

Introduction to materials: It contains Metal and alloys, ceramics, polymers and semi conducting materials-introduction and application as engineering materials. All those are easy go through that and just read it from here you may get some sort question. You can score minimum 4-8 marks from here.

Defects in solids: It contains Point, line and surface defects and diffusion in solids. You must read it from here you may get minimum 10-15 marks.

Mechanical properties: It contains Tensile strength, yield strength, elastic and viscoelastic properties, creep, stress relaxation and impact, Fracture behavior, Ductile fracture, Griffith theory, effect of heat treatment and temperature on properties of metals. It is a good chapter all has knowledge on this module and read early in H.S. or if you complete diploma then most of all were completed. If you have good luck then you get set question of 20 marks from here.

Deformation of metals: It contains Elastic and plastic deformation, slip, twin, dislocation theory, critical resolved shear stress, deformation in polycrystalline materials; season cracking, Bachinger's effect, strengthening mechanics; work hardening recovery, crystallization and grain growth, cold and hot working. All are easy and interesting and you may get 10-15 marks from here.

You May avoid Phase diagrams Module which contains Mono-component and binary systems, non-equilibrium system, phase diagram and. application in crystalline and non-crystalline solids. Because this module is very hard to remember. If you have mechanical background then you will go for that.

If you prepare this style you may attain two questions from Group A easily.

From Group B you have to select more. Like when I was seated I completely left those modules.

Heat treatment which contains Iron-carbon system, Annealing, normalizing, hardening, critical cooling rate, hardenability, age hardening, surface hardening, tempering.
Thermal properties which contains High temperature materials, materials for cryogenic application, thermally insulating materials.
Better you should go for that those are very easy.

Ceramic materials:  Which contains and polymers. Silicon structures, polymerism , glass, electrical properties of ceramic phases, rocks, building stones, refractories. You may get set question of 20 marks from here.

Polymerization mechanism: It contains structural properties of polymer, thermoplastics, thermosets, elastomer, resins, composites, particles and fibber reinforced composite, Composite material including Nano material. From here you may get 10-15 marks

Electronic properties: It contains Magnetism, diamagnetism, Para magnetism, ferromagnetism, magnetic energy, zone theory of solids, zones in conductors and insulators. From here you may get 5-10 marks.


So you may attain Full 100 marks but in style. But if possible best practice is read all. If you feel it is helpful please reply Then I will give more tips.

32 comments:

  1. Sir,
    It is really helpful. Sir kindly tell me the referance book for this subject.

    ReplyDelete
    Replies
    1. wow..that is excellent breaking down subjects into different groups according to marks assigned and it can be studied accordingly.Thus we can concentrate on the important topics and utilize it.

      Delete
  2. at first star with jain brother book and ieindia study material

    ReplyDelete
  3. sir, thanks for your guidence.

    ReplyDelete
    Replies
    1. It is my plesur dikshant you are welcome

      Delete
  4. Please sir me about how to study fun.damental of manufacturing and design

    ReplyDelete
    Replies
    1. For fdm deepak please see that http://www.amie.nbcafe.in/phpbb/last-minute-suggestion-on-fdm-ad-301-t2037.html it will help you lot

      Delete
    2. How to pass computing & informatics

      Delete
  5. how to study 303 computer and infomatics

    ReplyDelete
    Replies
    1. If you have computer science/ Comp. Engg back ground
      Then there is no need to explicitly tell u anything.
      Else
      If you are willing to take up programming part seriously, better join to an institute (need not be a reputed one, just choose a small institute near by your residence) and take up C and C++ programming course. Try to do lots of hands on sessions. Try as many programs as possible. Using Turbo C and Turbo C++ is ok for this. Before that try to buy C and C++ books. There are tons of books available in the market. If you have opportunity to visit to a book shop, better choose a right book by comparing the style of presentation and the style you expect to learn from.

      If you don't feel that u are ok with programming, then focus on theory part (even in C and C++ theory questions could be expected). Better focus on Digital (easy), Computer Networks(basics), Operating Systems basics, Computer Architecture and Organization (basics), by keeping an eye on previous year question papers. If you are lucky, there could be a balanced way of questions asked (between theory and programs), and you can pass. Try to do some simple programs, as its always keep you in safer side to clear this paper.

      Delete
  6. Hi,
    Could u pls suggest which books are fine to pass AMIE exams @ first attempt.
    Thanks

    ReplyDelete
  7. Hello Boss,

    Its really helpful and nice.

    Pls share additional details if any.

    Thnx a lot

    ReplyDelete
  8. its very helpfulll boss I have one doubt is that coaching is necessary for amie

    ReplyDelete
  9. dear sir,

    i applied for AMIE 2 years before and unable appear in any exam due to some problem. still can i appear in exam with same registration

    ReplyDelete
    Replies
    1. yes, u have to finish section A within six years with same registration

      Delete
  10. sir say the author name of COMPUTING AND INFORMATICS subject pls and material science and engineering subject also.......please sir

    ReplyDelete
  11. I am attempting 1st time AMIE. Kindly give me guidance for passing all subject in one time. I am ok with Computure & informatics & Social..Except other 2 subjects

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. After completing section A, May I take 1 -2 year break? & Then can I appear for Section B?

    ReplyDelete
  14. After completing section A, May I take 1 -2 year break? & Then can I appear for Section B?

    ReplyDelete
    Replies
    1. Yes you can.total time limit 12 years.(section A +section B)

      Delete
  15. Hello sir.
    I m working and housewife too with small baby(1.5 year).
    I attempted material science approximate 4-5 times but I didn't passed it. Rest three exam already clear. And I have only 2 hr for my study. Can you please guide me, how can I passed this subject so I can appear in section B.
    Please help.
    Thanks in advance.

    ReplyDelete
  16. Ruchi ji ,you can follow above instruction/sujjesion that can be helpful for you..avoid some chapter which are difficult to remember .only follow that chapter which are easy to remember..I hope you will pass now.
    Ok

    ReplyDelete
  17. This is what I am searching for
    Thank you very much

    ReplyDelete
  18. very nice guidance for those who are willing to do AMIE

    ReplyDelete
  19. Interesting Article. Hoping that you will continue posting an article having a useful information. Online Courses for Mechanical Engineering

    ReplyDelete
  20. dear sir
    how can i download the amie section a 302 syllabus

    ReplyDelete